How to Choose a Battery for Your Truck: 5 Checks

To choose a battery for your truck, match the manufacturer-approved group size, terminal layout, minimum CCA, reserve capacity, and battery chemistry to the engine, climate, and accessories. Then confirm the replacement battery fits the tray, accepts the truck’s charging strategy, and meets the electrical demands of starting and parked equipment. Key Facts at a Glance […]

How to Install a Fuel Cell in a Truck Bed Safely

To install a fuel cell in a truck bed, select a fuel-compatible cell, mount it in a rigid cradle with approved hardware, connect the correct feed and return lines, route a rollover-protected vent, wire the sender and pump safely, then perform leak and pressure tests. A sound installation usually takes 6-10 hours, and structural restraint […]

How Often to Reseal Travel Trailer Roof: A Safe Schedule

Reseal a travel trailer roof whenever inspection finds cracked, loose, split, or separated sealant, while using every 90-180 days as the normal inspection interval. Many trailers need localized seam repairs every 1-3 years, but a full roof recoat is not automatically due every 3-5 years. Roof material, UV exposure, storage, movement, and sealant condition determine […]

How to Install a Toolbox in a Truck Bed Safely

To install a toolbox in a truck bed, place the box squarely across or beside the bed rails, protect the contact surfaces, and secure it with J-hooks or drilled bolts specified by the manufacturer. A typical crossover installation takes 30-60 minutes. The most important factors are rail compatibility, cab clearance, even tightening, and a final […]

How Often Should Truck Air Tanks Be Drained? A Daily Rule

Truck air tanks with manual drain valves should generally be drained at least once every operating day, preferably during the post-trip inspection, to remove accumulated water and compressor oil. Trucks with automatic drains still need regular moisture checks because a failed air dryer, clogged drain, or malfunctioning valve can send contamination into brake components. Key […]